How To Start A Makita Chainsaw. It’s Easy, You’ll Love It!
Chainsaws can be extremely powerful and very effective tools, but they can also be dangerous if you don’t know how to use them.
These machines require specific skills to operate and safety precautions. The Makita Chainsaw is no exception.
It is essential that any Makita user, whether a first-time or seasoned user, knows how to use the Makita chainsaw.
There is a common operating procedure for many types of equipment. This article describes the recommended start of a Makita.
6 Tips To Start Your First Makita Chainsaw
Makita chainsaws have a reputation for being the most reliable and popular saws available. It doesn’t matter if you are a novice or an experienced pro, it is important to learn how to start a Makita Chainsaw. These are six tips to help you get started.
1. Before you start your chainsaw, make sure to read the owner’s manual. This will allow you to familiarize yourself with all the controls and features.
2. Before you start the engine, make sure that your chain is properly lubricated.
3. Avoid touching the chain with your arms and hands. It can cause severe burns.
4. Even if you are only cutting small pieces of timber, eye protection is essential.
5. If something goes wrong, stop the engine immediately. A chainsaw can prove to be very dangerous if it isn’t used properly.
6. Take control of your surroundings and be aware of what is happening around you.
Safety Precautions For Starting A Makita Chainsaw
Safety is your number one priority when using any chainsaw.
We will start by highlighting the safety precautions you must take to ensure everyone’s safety. Here are some mandatory safety precautions that you should consider.
Do not touch the nose of the sawbar with any other objects.
1. Be careful with guide bar tip contact. This causes the bar to move suddenly backwards and upwards. This could lead to serious injury for users.
2. Makita was designed to be used with two hands.
It is possible to inflict serious injuries on the user, other users, or helpers if the equipment is being used alone.
3. Make sure that you have a fire extinguisher at hand in case of any fire-related emergencies.
4. Ensure that both handles are held securely with both hands during operation. The handles should be kept clean and dry.
5. The chainsaw requires energy and attention. It is best to not operate it if you are tired or absent-minded.
6. Protective clothing is important when operating a chainsaw. You can use earmuffs or full sleeves shirts, boots, sunglasses and hand gloves to protect your hands when operating the chainsaw.
These products can protect your skin from damage from accidental incidents or chippings.
For supreme protection, you can refer to the BNQ or CSA protective clothes standards.
8. Fuel is the most inflammable substance. This is why fueling and refueling should be performed at least 3.0 m from the point of operation.
8. To prevent slippage and accidents, ensure that you have a solid, secure, and fixed footing during operation.
Also, make sure that no children or animals are present during the operation.
10. When operating the chainsaw, keep your back straight and maintain a standing posture.
A saw that has an improper or damaged adjustment is not recommended for use. This could result in a fatal accident. Before you use the saw, make sure it is properly assembled.
How To Start A Makita ChainsawIt’s Easy, You’ll Love It!
Make sure you’ve thoroughly tested the chainsaw and assembled it correctly before you start it. Place the saw on a stable surface with the guide bar and chain far away from anything.
Block the chain brake and, while holding the front handle tightly, push the saw against the ground. You should hold the rear handguard with your right foot. Makita chainsaws feature a Featherlight start system, which guarantees a smooth start. Follow the instructions exactly.
Cold Start The Chainsaw
The fuel pump must be primed in cold weather. You need to press the pump repeatedly until the fuel is visible. Push the combination switch upwards until it reaches the choke position. This will disable the half-throttle lock.
Now you can give the starter handle a final push. You can do this by gently pulling the starter handle. It is important not to pull the starter cable out of its socket for more than 50cm. This could cause damage. It is best to let it go slowly and by hand.
Then, go through the same procedure again, but this time, move the combination switch to ON. Once the engine is running, pull the starter handle again smoothly and evenly. After the engine has started, grab the rear handle and push the throttle trigger.
To prevent damage to your clutch, make sure the engine is turned off after starting the equipment. For smooth running, remove the chain brake.
Warm Start The Chainsaw
Warm starting the Makita Makita chainsaw follows a similar procedure to cold starting. Only difference is that the combination switch must be moved to the choke position prior to starting, and then back to the ON position immediately after.
This engages the half throttle lock. After two to three pulls, the engine should start. If the engine does not start, you can repeat the cold starting procedure.
The combination switch can be used to restart the saw if the engine has been stopped for a brief time. If the engine stops due to running out fuel, you will need to priming the pump enough times to see fuel.
Frequently Asked Questions (FAQs
How To Start A Flooded Chainsaw.
It may be difficult to start a flooded chainsaw. It can be done by switching the switch to ON and holding the saw down to the ground. Then, you can start the normal starting process.
Keep pulling the starter rope fast until it begins to turn. You should not pull the starter rope at its maximum length. Short, fast pulls are preferred.
Can You Start A Saw With A Brake?
You should turn on the chain brake before you start. Some models of chainsaws can be started in the half-throttle mode. If the brake is not engaged, the chain can rotate in this position.
How Can You Start A Chainsaw Which Won’t Start?
Open the spark plug hole and drain the fuel tank to resolve the problem. To deactivate the choke, push in the control while pushing in the throttle control. Dry the spark plug, and then return it to its original place.
Why Is My Chainsaw Pulling So Hard?
The chainsaw may be difficult to pull for a variety of reasons. The pully system could be stuck, snagged or damaged. Or the starter assembly may be sticky or stuck.
Why Does My Chainsaw Pull To The Right?
The problem is in the chain if your chainsaw pulls to one side when you are cutting. The top plates are the ones that attach to the longer teeth on the chain.
The plates should be the same size. If some plates are shorter than others, you can file the shorter ones down to match.
